emtelle logo DE

PRE-FIBRED ACCESSORIES

Our range of accessories to compliment your Pre-Fibred solution.

Aerial

Universal Pole Bracket (UPB)

High mechanical strength aluminium alloy bracket for anchoring various aerial hardware onto all types of infrastructure poles.

Galvanised Helical Drop Clamp

Galvanised steel helical warped -dead end- cable clamp design to warp around aerial cables to tie-off cables onto pole brackets and drop anchoring points.

Mini Drop Clamp

Drop cable clamp featuring an all-plastic UV resistant body and tool less design. Used for securing a round aerial drop cables 3-4mm up to 70m spans.

Triangular Clamp

3-hole anchoring bracket that can be fix onto exterior surfaces by selecting appropriate screws. Used as a termination bracket for customer drop cable clamp.

View More

Connectors & End Caps

Clear Microduct Connectors, End Stop & Reducers

Clear push-fit tube connectors, end caps and reducer connectors suitable for use with FibreFlow microduct to ensure a seamless and airtight connection while blowing fibre cable or fibre bundle.

ELFS- Fibre Lock

Fibre lock system to eliminate lateral movement of terminated fibre bundles due to vibration or thermal expansion / contraction of the duct system. Design specifically for Emtelle FibreFlow products.

Gas Block Microduct Connectors

Gas block connectors provides an in-line seal between the connector, tube and fibre cable preventing gas and water from entering the cable system and leaking into unwanted areas.

Fibre Cable and Miniduct Seal

Split gas / water block tube end seal for installation on new and existing infrastructure to prevent gas and water for entering the cable system. Small form factor tubes and cables seals.

View More

FibreFlow Connectivity

EDSA

CommScope FIST-EDSA fibre optical splice and patch closure. The closure is a bespoke solution for termination and patch customer connection onto pre-installed internal patch panel. The panel support up to 48 customer connections.

TENIO

CommScope TENIO fibre optical splice closure with fast toolless mechanical cable sealing. Modular design to suite a wide range of cable and splicing application. With 2 standard sizes supporting up to 144 splices or larger up to 288 splices.

OFDC 1

CommScope OFDC fibre optical splice closure range is designed to support a wide range of distribution and drop cable. Modular and suitable for splicing or connectorised drop cable. Compact design suitable for aerial or underground deployment.

FLAT FIST

CommScope Flat-Fist GCO2 fibre optical splice closure with 8 entry ports. Modular design to suite a wide range of cable and splicing application. With 2 standard base designs supporting up to 144 splices.

View More

Tube Bundle Connectivity- External

Emtelle Toby Box

The Emtelle Toby Box is a compact access point from where a technician can easily maintain and install customer connection infrastructure. The underground box can be used to store excess cable slack or fit a compact splice closure.

FibreFlow Smart Box

The Smart Box is an underground mini chamber for housing microducts and splice closures. It’s normally located at the boundary of the customer’s property during FTTH installations and is used as an overlength storage and as a marker and access point for drop ducts where the customer does not require an immediate FTTH connection.

EM-Wrap Standard

EM-Wrap solution is designed to be quick and easy to install. It offers protection to exposed microducts and tube connectors when preforming a tube breakout. It also offers ingress protection to the exposed systems.

EM-Bend Manager

EM-Bend solution is designed to be quick and easy to install only using cable ties. It offers a smooth 90 degree bend while protecting the tube connector for optimal cable blowing performance.

View More

Tube Bundle Connectivity- Customer Entry Solutions

External Customer Lead In (Small)

External trucking and through wall protection of fibre optical customer drop cable. The solution offers an aesthetically pleasing installation while functionally protecting infrastructure.

External Customer Lead In (Large)

External trucking and through wall protection of fibre optical customer drop cable. The solution offers an aesthetically pleasing installation while functionally protecting infrastructure.

CTU 1.0 (Splice)

The CTU closure is a compact access point from where a technician can easily maintain and install customer connection infrastructure. The wall mounted closure can be used to store excess cable slack and support a connection splice.

CTU 1.5 (Patch)

The CTU closure is a compact access point from where a technician can easily maintain and install customer connection infrastructure. The wall mounted closure can be used to store excess cable slack and support an optical connector.

View More

Tube Bundle Connectivity- Internal

3 Port FibreFlow ITFP

Internal breakout closure for easy routing of internal microducts inside a building riser or cable tray while offering bend protection and connector protection.

4 Port Fibre Flow ITFP

Internal breakout or distribution closure for easy routing of internal microducts inside a building riser or cable tray while offering bend protection and connector protection.

Y-Branch (Internal)

Internal Y- shaped closure for deviation microtube in separate directions inside a building riser or cable tray while offering bend protection and connector protection.

Internal TDC

FibreFlow tube distribution closure is a protective closure to manage and distribute microducts. The closure allows for easy routing in almost any direction through its 7 ports. Flame retarded material allows for use inside a building riser or cable trays.

View More

Subscribe to our Newsletter