emtelle logo DE

EMTELLE HOME CONNECT


Pre-Connectorised  FTTH  In-Building  

A pre-connectorised fibre microduct system for internal & external use. This product is intended for use where an installer needs a quick and easy one stop solution for an internal/external drop cable installation. The product comes pre-terminated with a LC or SC connector at the house end. There is a 3mm LFH sheath for internal use, which is covered by a 5mm PE sheath for external use, both protecting the fibre inside the product.

KEY BENEFITS

  1. 1.

    Can be installed internally & externally.
  2. 2.

    Slideable & adjustable external sheath on an internal cable.
  3. 3.

    Pre-connectorised cabling system.

KEY FEATURES

  • Product pre-connectorised with LC/APC or SC/APC connectors.
  • Strong flexible PE black outer sheath (colour options).
  • Discreet, small and flexible LFH inner sheath.
  • Quick Installation.
  • Low skill resource requirement.
  • Low installation equipment cost.
  • The only solution on the market with slideable & adjustable external sheath on an internal cable!

Product Map

product map

Installation Steps

  1. 1.

    Delivered on coils. Available in lengths of 5m, 20m, 30m & 50m.
  1. 2.

    Plug in Emtelle HomeConnect. Connect into CCP.
  1. 3.

    Slide and adjust the external sheath to expose LFH tube to required length.
  1. 4.

    Run the 3mm cable to exit point within the home.
  1. 5.

    Exit home using internal lead in kit.
  1. 6.

    At CCE secure 3mm LFH & 5mm PE cables.
  1. 7.

    Run the cable to9 the nearest splice or fibre connectivity point.
  1. 8.

    Strip and prepare the fibre.
  1. 9.

    Splice the fibre bare and connect Emtelle HomeConnect at the access chamber or cabinet.

DOCUMENTATION

SELECT DOCUMENTS
Brochure
Datasheet

RELATED SOLUTIONS

QWKCONNECT

Product image

Emtelle QWKconnect is a pre-connectorised fibre drop cable for FTTH that offers product and installation cost savings, and a reduction in installation equipment.


DETAILS

QWKLINK

Product image

Emtelle QWKlink pre-connected fibre bundle allows for fibre connectors on both ends, eliminating the need to splice fibres for FTTX drop applications.


DETAILS

Got any questions? Speak to our Solutions Expert

Contact Us

Jamie McGee
Product Specialist


Subscribe to our Newsletter