Data Centers

Certified, High-Performance Connectivity for Global Networks. MTP/MPO Trunk, Breakout and Conversion Cables. MTP/MPO to LC/SC/FC/ST Fan-Out and Harness assemblies for scalable, high-performance fibre networks. Designed for hyperscale and enterprise data centre environments, all assemblies comply with IEC, Telcordia, and global data centre standards.

Plenum Safe Microducts and Conduits, for indoor installations. UL and cUL listing and certification.

Multipath is a fully developed, proven and integrated cable management system that eliminates the need to winch in sub-duct.

Multipath is a fully developed, proven and integrated cable management system that eliminates the need to winch in sub-duct.

Multipath is a fully developed, proven and integrated cable management system that eliminates the need to winch in sub-duct.

Emtelle UK have developed a comprehensive range of Telecom Duct systems and accessories, designed to meet performance requirement for underground Telecom networks.

uPVC Power Duct Interference Ring Seal (IRS) Socket ensures fast, secure connections while effectively preventing the ingress of dirt and water. The system is complemented by a full range of compatible bends and accessories, with customisation options available to meet specific project requirements.

PowerProtect+ uPVC IF Duct is a durable and versatile ducting system designed for Medium Voltage, High Voltage, and Shallow Burial applications. With integrated Interference-Fit sockets and a full range of accessories, it ensures secure, efficient installation across varied environments.

PowerProtect+ uPVC IF Bends provide reliable directional changes in duct routes, designed to meet typical power cable bending requirements. Each bend includes an integrated Interference-Fit socket for quick, secure, and debris-resistant connections.

uPVC Power Bend with Interference Ring Seal (IRS) Socket features a built-in IRS socket that enables quick and secure connections while preventing the ingress of dirt and water.

Emtelle Con-Duct range of ducted products enables rapid tractability of cable sheath faults within a ducted network, due to our innovative conductive coating.

Emtelle Con-Duct range of ducted products enables rapid tractability of cable sheath faults within a ducted network, due to our innovative conductive coating.

The HSI system is casted directly into the wall, for an easy duct and cable entry solution.

CON-DUCT range of ducted products enables rapid tractability of cable sheath faults within a ducted network, due to our innovative conductive coating.

Low Fire Hazard (LFH) microducts, each with low friction performance and suitable for fiber blowing.

Low Fire Hazard (LFH) Microduct contains material suitable for indoor fire regulation, giving excellent performance in fire scenarios.

Emtelle UK have developed a comprehensive range of Telecom Duct systems and accessories, designed to meet performance requirement for underground Telecom networks.

Emtelle UK have developed a comprehensive range of Telecom Duct systems and accessories, designed to meet performance requirement for underground Telecom networks.

Emtelle UK have developed a comprehensive range of Telecom Duct systems and accessories, designed to meet performance requirement for underground Telecom networks.

Access Chambers have been designed for both footway and roadway installations, where they provide access to underground ducting.

Covers and Frames are suitably designed with manual handling requirements in mind and feature slide out covers with tapered sides for safety.

Cable protection tiles are heavy duty protective boards designed to provide a protective layer for underground ducted networks.

Provides a protective layer for underground ducted networks. Easy to roll over cable ducts.

Suitable for power, street lighting and fibre optic cables. Available with detectable wire for traceability.

Duct spacers are designed to assist when laying duct networks in configurations, e.g. a trefoil or grid array.

Duct brushes are used to removed dirt and debris from inside assembled duct systems.

Duct Sealing both gas / water block tube end for installation on new and existing infrastructure to prevent gas and water for entering the cable system.

The LC-QR (Quick Release) Connector is a simplex connector featuring a patented front body latch that automatically disengages from a standard LC adaptor under cable strain or accidental snagging.

RTRYVA Indoor is a small, retractable, pre-installed fiber solution.

PIFU™ Indoor is a pre-installed fiber microcable within a microduct, specially designed for indoor applications.

QWKconnect Indoor is a pre-connectorized fiber bundle pre-installed within a fire-rated LFH microduct.

PowerProtect+ HDPE Duct is a durable and dependable power ducting solution, available in specifications suitable for Low to High Voltage applications.

High quality cable duct in PE100. Made for all applications within the cable protection marked. Industry Standard EN 12201

Raised Temperature, Resistance to Cracking, Polyethylene Duct. Same as PE-RT but with the added benefit of enhanced stress crack resistance. Industry Standards DIN 16833 and EN 1555

Highly Sustainable Cable Protection Duct made for horizontal directional drilling (HDD). Proven high tensile strength while still maintaining a low impact on the environment.

Raised Temperature Polyethylene Duct. Added thermal stability and used for high voltage and extra high voltage. Industry Standards DIN 16833 and EN 12201

High quality Cable Protection Duct. Made as C1+ in accordance with ENATS 12-24

Cable Protection Duct made in accordance with DIN 16874

Strong and durable Cable Protection Duct. Made in accordance with the ESB specifications.

EM-Finity Large has the capability to have either 1056 splices, 48 SC or 96 LC pre-connectorised customers.

Emtelle Fibre Lock System to eliminate lateral movement of terminated microcables due to vibration or thermal expansion / contraction of the duct system. Design specifically for Emtelle FibreFlow products.

FibreFast Blown Minicables are designed to be lightweight with a low-friction HDPE jacket / outer sheath. With a smaller outer diameter than traditional cables, FibreFast Blown Minicable allows for optimal filling of microducts with optic fiber.

In addition to drawing cable, the foam pig can be used as a pipeline cleaning device.

Welcome to the Future of Connectivity: Where Power and Communication Converge!

The Large Distribution Wall Box (LDWB) is a wall-mounted splice enclosure designed for distributing fibre to customer drop cables in MDU Scenarios. It has a capacity of up to 240 fibre splices and can accommodate input cables of both butt and in-line types.

Lubricant reduces frictional drag during the blowing of small diameter fibre optic minicables into microducts.

The worlds first single component fire rated fixing. Ideal for use with Emtelle's QWKConnect, 6-10mm RTRYVA, PIA ULW and 4-14mm Microducts.

Longitudinal Sheath Stripper has been designed to remove the outer sheath from DB tube bundle. There are four blade depth settings on the tool and it is supplied with two guards giving 12 possible blade depths.

Metal proving pigs are used to 'prove' the internal bore of a duct fall below a minimum diameter and has a circular profile.

Microduct Rotational Cutter is a handheld tool suitable for stripping cable jackets, cable sub assemblies and microduct both longitudinally and circumferentially.

The Multipath Stop Coupler is a green uPVC accessory designed for 117mm primary ducts. Supplied in packs of 10, it provides a secure termination point within multipath duct systems.

The Multipath Slip Coupler is a uPVC accessory designed for 117mm primary ducts. It comes in green and is supplied in packs of 10, providing a reliable solution for seamless duct connections.

Multipath Type A Terminator

The compressed seal expands into full contact with the inside duct walls thereby providing an effective, seal to your duct system in seconds.

Emtelle Ring Seal Couplers are manufactured from solid wall uPVC duct and provide the means to connect two plain ends of duct. Both ends of the coupler contain a ring seal to standard BSEN 681-1 (type WA).

Emtelle Ring Seal Couplers are manufactured from solid wall uPVC duct and provide the means to connect two plain ends of duct. Both ends of the coupler contain a ring seal to standard BSEN 681-1 (type WA).

Emtelle Ring Seal Couplers provide a watertight, IP-68-rated connection for green telecoms ducts. Manufactured from solid wall uPVC, they enable secure joining of two plain duct ends with integrated BSEN 681-1 compliant seals.

Emtelle Stop Couplers are designed to securely seal the end of green telecoms ducts, preventing the ingress of water and debris while maintaining system integrity.

Ball Chains are recommended by Emtelle for Calibration into Microducts.

Blowing Beads are fixed to the end of the fibre before blowing starts. It guides the fibre through connectors and around sharp bends.