An English translation of this page is available here translate
We have not yet translated this page into your language. Please use Google Translate:

Voice and Broadband


High-speed Telecoms Voice and Broadband

High-speed Telecoms voice and broadband has joined running water, gas and electricity as a necessity in the home.

It has become the fourth utility. High-speed telecoms voice and broadband delivers applications such as video on demand, HDTV, gaming, home security, telecommuting, movie downloads, video conferencing, and sophisticated telephone service. All these services are now in high demand, and are mainly fuelled by the advert and adoption of optical fibre.

Our FibreFlowTM blown fibre solution reduced both installation costs and on-going expenses for high-speed telecoms voice and broadband. Ducts and tube bundles can be laid in preparation for fibre. Fibre is then blown into the ducts to supply high-speed telecoms voice and broadband service only when needed.

Key Products
PVC Duct
• 53.9mm / 96.5mm / 110mm
• Colours: Orange, green, grey, dark grey, white & purple
• Manufactured from virgin PVC-U polymer
• 100% reliable performance
• Duct systems are manufactured to Industry Standard BSEN 61386

Large Diameter Solid Wall PE Duct
• Light, durable yet flexible cable protection system
• Can be joined using butt fusion welding, electrofusion couplers and mechanical fittings/connectors
• Sizes from 75mm up to 250mm Outside Diameter, in SDR11 or SDR17 versions.

Sub Duct Microduct
• Rapid deployment technique
• Reduces overall network construction and activation cost
• Bespoke requirements can be accommodated
• Cable blowable
• Cable installation utilizing the pre-installed pulling rope
• Provides a dedicated cable path
• Reduces the risk of damage to fibre optic cables

Fibre Cable
• Range of micro and mini cable products
• Work in conjunction with Emtelle’s low-friction tube bundles for optimum blowing performance
• For high fibre counts, a range of fully water blocked mini cable products with FRP Central strength member (12f-216f) is available

Access Chambers
• Preformed access chambers
• Offers fast tract construction methods
• Single site visit
• No need for concrete backfill
• Stakkabox & Stakkabox QUAD (B125 rated)
• Stakkabox Fortress
• Wedge boxes

Ancillary Products
• Duct Spacers (4 way and 8 way)
• Emtelle Motorway Communications Duct Seal
• Rope (Blue 5kn)
• Rope (Orange 8kn)
• Marker Tape
• Duct Lubricant
• Cleaning Brushes and Proving Mandrels
• Rope Blowing Guns

Covers & Frames
· Ductile Iron Cover and Frames.
· Suitable for use in footpaths, car parks, grass verges, and areas with slow moving traffic including HGV's.
· Cover and frames are certified to the European Standard Class B125 of BS-EN124 and Kitemarked.
· Bespoke badging available on request.

Tube bundle with 7,12, 19 or 24 X 4/2.1mm Microducts
• 1, 2, 3 or 4 Fibres Pre-Installed into each Microduct (2d, A1 & A2 Fibre)
• Emtelle can partially fi ll or fully fi ll the tube bundle with fi bres
• 500M or 800M supply lengths
• No blowing required, only Pull & Push
• Still has a dedicated pathway to each home
• Easy to repair, upgrade and connect

Pre-connectorised microduct system
A duct that can be installed underground (direct buried and
ducted), along walls or even overhead, including wifi antennas
• Fibre pre-installed can be connectorised at one end or both ends
• SC and LC APC connector options available
• No blowing or fibre splicing required for the customer drop
• Extremely small storage area for excess fibre
• Reduced skill set & training required for the install
• Massively reduced capex for installation equipment
• Cost (and space) effective compared to similar products in the market
Incredibly flexible retractable duct system in which fibre can be accessed at any point along its length
• 4-8 times more fibre drops can be made from an existing 32mm, or 1¼ HDPE duct compared to traditional cables
• Fibre tubes (within the RTRYVA) can vary from 2-12 fibres per tube
• A mix of fibre counts is available for your specific requirements
• High speed installation and connectivity with no specialist training
• No blowing equipment required
• GRP strength members to offer additional strength and longevity
• A simple to install drop closure to the home (4 drops per closure)
• Drop tubes can have pre-installed draw string to aid fibre installation to the home
• Massively reduced capex for installation equipment
• Cost (and space) effective compared to similar products in the market
Ultra-thin microcable with up to 12 fibres set in an encapsulating layer providing excellent dimensional and thermal stability
• Designed to be installed by blowing, pulling or pushing
• Low weight
• Small diameter
• All dielectric design
• Ultra low friction sheath
• Thermoplastic layer to give high protection
• Fibres are dry, no gel used.
DNU Hospital
FibreFlow Blown Fibre
“The New University Hospital” – commonly known as “DNU” which when completed in 2019 will treat approximately 1 million patients annually.
Blown Fibre in Ports
FibreFlow Blown Fibre
Hueneme, Long Beach, Oakland and San Diego, USA
When the ports of Hueneme, Long Beach, Oakland and San Diego had the requirement for a quick, secure and reliable transmission of highly sensitive, mission-critical data, they chose the Emtelle FibreFlowTM blown fibre solution.
Engage Emtelle