uPVC Duct Accessories

The 5kN Blue Polyprop Rope (6mm) is a durable uPVC duct accessory, supplied in blue on 500m bobbins. Ideal for cable pulling, it offers high strength and reliability for duct installations.

In addition to drawing cable, the foam pig can be used as a pipeline cleaning device.

Nylon proving pigs are used to 'prove' the internal bore of a duct fall below a minimum diameter and has a circular profile.

Metal proving pigs are used to 'prove' the internal bore of a duct fall below a minimum diameter and has a circular profile.

Duct brushes are used to removed dirt and debris from inside assembled duct systems.

The compressed seal expands into full contact with the inside duct walls thereby providing an effective, seal to your duct system in seconds.

The duct plug can be adjusted to suit the internal diameter of a duct by hand tightening the wing nut.

Simplex Seals consists of a thermoplastic elastomer seal, split to ease cable installation. Inner and outer wedges grasp the pipe or cable creating a rain-proof seal.

Permanent mechanical duct and cable seals to prevent ingress of dirt and water.

Push-fit End Caps prevent debris or contaminants from entering the duct system when installing cable.

Duct spacers are designed to assist when laying duct networks in configurations, e.g. a trefoil or grid array.

DTS clips are designed to clip onto power duct to hold a DTS duct in place.

Multipath Type A Terminator

Cable protection tiles are heavy duty protective boards designed to provide a protective layer for underground ducted networks.

Provides a protective layer for underground ducted networks. Easy to roll over cable ducts.

Suitable for power, street lighting and fibre optic cables. Available with detectable wire for traceability.

The Hockey stick bends are used for domestic connections in conjunction with service coils.

The HSI system is casted directly into the wall, for an easy duct and cable entry solution.

The couplers are used in install scenarios to allow for expansion/contraction between two plain ends of two ducts.

Transition provide the means to connect the plain ends of two ducts with differing internal/external diameters for a smooth transition.