Overhead Fittings

Bolt 16 x 300mm is a standard bolt set for securing aerial hardware onto poles with through holes greater then 16mm. Suitable for short span aerial hardware.

Steel Buckles for securing aerial hardware and splice closures onto poles.

Cable Clamp suitable for anchoring circular dropwires. Has tapered grip action using jaws that grip the insulation over the dropwire. Use predominantly on figure -8 aerial cables.

Expanding Bolt 1A is an anchoring point that can be secured into a brick/concrete wall. Used as a termination bracket for customer drop cable clamp.

Extended Drop Cable Bracket has 4-holes with extended anchor point for additional clearance of obstructions that can be fixed onto exterior surfaces. Used as a termination bracket for customer drop limited to 40m spans.

Fibre Locking Mechanism is used to secure and isolate ULW style cable elements between cable span and splice closure. Evenly spread cable tension over all cable elements.

Galvanised Helical Drop Clamp steel warped -dead end- cable clamp design to warp around aerial cables to tie-off cables onto pole brackets and drop anchoring points.

Drop Cable clamp featuring an all-plastic UV resistant body and toolless design. Used for securing a round aerial drop cables 3-4mm up to 70m spans.

Overhead Ring with Top Bolt is a pole mounted halo style top ring for securing multiple customer drop cable clamps in multiple directions.

Steel Banding for securing aerial hardware and splice closures onto poles.

Tensioning Tool for securing aerial hardware and splice closures onto poles.

Triangular Fitting Clamp has 3-hole anchoring bracket that can be fix onto exterior surfaces by selecting appropriate screws. Used as a termination bracket for customer drop cable clamp.

Universal Pole Bracket has a high mechanical strength aluminium alloy bracket for anchoring various aerial hardware onto all types of infrastructure poles.