EM-FINITY

EM-Finity Large has the capability to have either 1056 splices, 48 SC or 96 LC pre-connectorised customers.

EM-Finity Medium has the capability to have either 672 splices, 48 SC or 96 LC pre-connectorised customers.

EM-Finity Small has the capability to have either 288 splices, 24 SC or 48 LC pre-connectorised customers.

EM-Finity Lite delivers versatility, ease of installation and the capability to have either 144 splices, 12 SC or 24 LC pre-connectorised customers.

Oval Port Seal for Emtelle microducts. The mechanical seals work by compression to seal the microducts or cables into the EM-Finity range of splice domes.

Round Port Seal for Emtelle microducts. The mechanical seals work by compression, to seal the microducts or cables into the EMFinity range of splice domes. Small, Medium and Large.

Access Box is a micro handhole that provides easy access to feeder & distribution cables and or ducts.

Access Chambers have been designed for both footway and roadway installations, where they provide access to underground ducting.

Covers and Frames are suitably designed with manual handling requirements in mind and feature slide out covers with tapered sides for safety.

Provide security and protection of equipment and fibre within telecommunications external chambers.

Smart Box 300 is an underground mini chamber for housing microducts and splice closures. It’s normally located at the boundary of the customer’s property during FTTH installations and is used as an overlength storage.

Smart Box 400 is an underground mini chamber for housing microducts and splice closures. It’s normally located at the boundary of the customer’s property during FTTH installations and is used as an overlength storage.

Square Toby Box (Quad) is designed for terminating telecommunications cabling and has an opening lid, allowing for close abutment to adajacent walls.

Square Toby Box (Small) is designed for terminating telecommunications cabling and has an opening lid, allowing for close abutment to adajacent walls.

The Toby Box+ serves as a versatile FTTH solution for housing both Microducts and Splice enclosures.

Cabinet designed for dense distribution of customer connection and large distribution cable. Customer connections can be directly spliced or distributed though the LGX splitter modules.

Smartlock is a lock and key system providing an extra security line to operators and their networks. It allows a cabinet & closure to be protected and only accessed through a dedicated key. GPS tracking & is IP67-rated.

Boundary Wall Box is an IP55 termination point, installed as outside plant on walls and fences in the FTTX Network.

The Boundary Wall Box Slack Storage is a versatile storage box deployed in the FTTX network. The box can be used to store the slack from pre-terminated drop cables or fibre modules at the end of a riser cable.

Connect Point is an enclosure that fully encapsulates an internal mounting frame and splice tray, whilst sitting flush against a wall.

Complete internal home connect solution - pre-installed internal drop cable with customer connection point (CCP). Fully assemble for increased quality assurance and a fast reliable deployment.

Customer Connection Point providing a fibre termination point inside a residential property. The CCP comes complete with a preinstalled pigtail, connector and adaptor.

EMU Box has been designed by Emtelle to to suit many requirements for FTTH and FTTP projects.

A compact, wall-mounted access point for FTTH networks, the ETB features an integrated cable reel for fast, secure installations and tidy slack management. Ideal for use with microducts or trunking, it supports pre-terminated fibre and LC/SC adaptor mounts for quick customer connections.

Emtelle FiberMag stores up to 40 meters of optical fiber cables. Part of our Homes Passed Plus solution, this fiber storage system ensures quick, splice-free connections and is easily locatable when buried.

Fibre Optic Wall Outlet enables a fibre optic cable termination point to be presented within the end user home. The wall outlet can accommodate two fibre adaptors, either SC simplex or LC Duplex.

A discreet, in-home connection point for FTTH networks, the ITB provides a secure and tidy termination of optical fibre. Designed for easy wall mounting, it supports pre-terminated fibre and features adaptor mounts for LC or SC connectors, ensuring a fast, clean, and reliable customer installation.

Microloop is a multifunctional enclosure deployed in distribution networks. It can be wall mounted and is suitable for placement in manhole chambers or boundary access points.

Rapid-Stor is a multi-purpose bracket designed to manage cable slack, enclosure fixation and aerial cable hardware attachment in a small footprint.

Indoor Tube Flexibility Point closure for easy routing of internal microducts inside a building riser or cable tray while offering bend protection and connector protection.

CLO1 closure is a protective closure to manage and distribute microducts. The closure offers superior ingress protection with 4 large diameter port. Slightly more compact then the H-Branch.

EM-Bend product is designed to be quick and easy to install only using cable ties. It offers a smooth 90° bend while protecting the tube connector for optimal cable blowing performance. Can also be used as an L/T-branch.

EM-Wrap product is designed to be quick and easy to install. It offers protection to exposed microducts and tube connectors when performing a tube breakout. It also offers ingress protection to the exposed system.

EM-Wrap product is designed to be quick and easy to install. It offers protection to exposed microducts and tube connectors when performing a tube breakout. It also offers ingress protection to the exposed system.

External Customer Lead In and through wall protection of fibre optical customer drop cable.

External Customer Lead In and through wall protection of fibre optical customer drop cable. The solution offers an aesthetically pleasing installation while functionally protecting infrastructure.

H-Branch closure is a protective closure to manage and distribute microducts. The closure offers superior ingress protection with 4 large diameter port.

Y-branch closure for deviation microtube in separate directions inside a building riser or cable tray while offering bend protection and connector protection.

Internal Tube Distribution Closure is a protective closure to manage and distribute microducts. The closure allows for easy routing in almost any direction through its 7 ports. Flame retardant material allows for use inside.

RTRYVA™ Indoor 6mm BOBM is a discrete protective wall mountable housing / closure. The closure can support a 60mm window cut with built in fibre bend management.

Tube Distribution Closure is a protective closure to manage and distribute microducts. The closure allows for easy routing in almost any direction through its 7 ports. High impact resistance allows for direct buried application.

Bolt 16 x 300mm is a standard bolt set for securing aerial hardware onto poles with through holes greater then 16mm. Suitable for short span aerial hardware.

Steel Buckles for securing aerial hardware and splice closures onto poles.

Cable Clamp suitable for anchoring circular dropwires. Has tapered grip action using jaws that grip the insulation over the dropwire. Use predominantly on figure -8 aerial cables.

Expanding Bolt 1A is an anchoring point that can be secured into a brick/concrete wall. Used as a termination bracket for customer drop cable clamp.

Extended Drop Cable Bracket has 4-holes with extended anchor point for additional clearance of obstructions that can be fixed onto exterior surfaces. Used as a termination bracket for customer drop limited to 40m spans.

Fibre Locking Mechanism is used to secure and isolate ULW style cable elements between cable span and splice closure. Evenly spread cable tension over all cable elements.

Galvanised Helical Drop Clamp steel warped -dead end- cable clamp design to warp around aerial cables to tie-off cables onto pole brackets and drop anchoring points.

Drop Cable clamp featuring an all-plastic UV resistant body and toolless design. Used for securing a round aerial drop cables 3-4mm up to 70m spans.

Overhead Ring with Top Bolt is a pole mounted halo style top ring for securing multiple customer drop cable clamps in multiple directions.

Steel Banding for securing aerial hardware and splice closures onto poles.

Tensioning Tool for securing aerial hardware and splice closures onto poles.

Triangular Fitting Clamp has 3-hole anchoring bracket that can be fix onto exterior surfaces by selecting appropriate screws. Used as a termination bracket for customer drop cable clamp.

Universal Pole Bracket has a high mechanical strength aluminium alloy bracket for anchoring various aerial hardware onto all types of infrastructure poles.