An English translation of this page is available here translate
We have not yet translated this page into your language. Please use Google Translate:

FTTh

OVERVIEW

Market leading FTTh solutions

High speed broadband has joined running water, gas and electricity as a necessity in housing developments – it has become the fourth utility.

Applications delivered by high speed broadband such as video-on-demand, high definition TV, gaming, home security, telecommuting, movie downloads, video-conferencing, sophisticated telephone service and more are all now in high demand – mainly fuelled by the advent and adoption of optical fibre.

Our FTTh blown fibre solution reduces both installation and ongoing costs – ducts and tube bundles can be laid in preparation for fibre, which is blown into the ducts to supply service only when needed.

Vertex logo

 

flexform suitable for microtrenching

 

This includes our Vertex Microducts suitable for Microtrenching.

Key Products
Gas Block Connectors
• Internal seal
• Open to permit blowing, closed to seal contacts and prevent gas flow
• Microduct size from 3mm to 14mm
sales@emtelle.com

sales@emtelle.com

Pre-Installed Microcable FU
• Large variety of protected microducts pre-installed with various Microcable FY
• With or without low friction sheath
• Lengths of 1000m or 2000m
sales@emtelle.com

sales@emtelle.com

Customer Lead In Point
• Can be readily fixed to walls
• Manufactured from UV-resistant materal
• Can accommodate both 3mm & 5mm 1 way DB
• Transition point between internal and external FibreFlow
• Long-term bend protection
• Easy to install and use
• IP55 rated
sales@emtelle.com

sales@emtelle.com

Blown Fibre Micro & Mini Cable
• Designed to work in conjunction with Emtelle’s low-friction tube bundles
• Available as fully water blocked with an FRP central strength member
• Various sizes available
sales@emtelle.com

sales@emtelle.com

DBmf Heavy Wall Microduct Bundles
• Simplicity and strength
• Exceptional toughness and crush resistance
• Can be directly buried without additional protective closures
• Easy to use
• Quick to install
sales@emtelle.com

sales@emtelle.com

Protected Connectors
• Standard microduct protector pre-fitted with a removable outer shell
• Enhanced protection over an unprotected connector
• Also fit over equivalent sized end caps
sales@emtelle.com

sales@emtelle.com

Microducts suitable for Microtrenching

· Designed to maximise space inside microtrenches
· All microducts are direct buried rated
· Bespoke project designs incorporating various microduct sizes
· Microduct range of 5mm up to 18mm
· Can include a tracer wire
· Compatible with other Fibreflow tube bundles
sales@emtelle.com

sales@emtelle.com

MDU – Building Entry products
· Access to building with reduced disruption
· Easy to use
· Allows for individual and multiple entry points
Multifu
Tube bundle with 7,12, 19 or 24 X 4/2.1mm Microducts
• 1, 2, 3 or 4 Fibres Pre-Installed into each Microduct (2d, A1 & A2 Fibre)
• Emtelle can partially fi ll or fully fi ll the tube bundle with fi bres
• 500M or 800M supply lengths
• No blowing required, only Pull & Push
• Still has a dedicated pathway to each home
• Easy to repair, upgrade and connect
sales@emtelle.com

sales@emtelle.com

RTRYVA
Incredibly flexible retractable duct system in which fibre can be accessed at any point along its length
• 4-8 times more fibre drops can be made from an existing 32mm, or 1¼ HDPE duct compared to traditional cables
• Fibre tubes (within the RTRYVA) can vary from 2-12 fibres per tube
• A mix of fibre counts is available for your specific requirements
• High speed installation and connectivity with no specialist training
• No blowing equipment required
• GRP strength members to offer additional strength and longevity
• A simple to install drop closure to the home (4 drops per closure)
• Drop tubes can have pre-installed draw string to aid fibre installation to the home
• Massively reduced capex for installation equipment
• Cost (and space) effective compared to similar products in the market
QWKconnect
Pre-connectorised microduct system
A duct that can be installed underground (direct buried and
ducted), along walls or even overhead, including wifi antennas
• Fibre pre-installed can be connectorised at one end or both ends
• SC and LC APC connector options available
• No blowing or fibre splicing required for the customer drop
• Extremely small storage area for excess fibre
• Reduced skill set & training required for the install
• Massively reduced capex for installation equipment
• Cost (and space) effective compared to similar products in the market
Nanocable
Ultra-thin microcable with up to 12 fibres set in an encapsulating layer providing excellent dimensional and thermal stability
• Designed to be installed by blowing, pulling or pushing
• Low weight
• Small diameter
• All dielectric design
• Ultra low friction sheath
• Thermoplastic layer to give high protection
• Fibres are dry, no gel used.
DNU Hospital
FibreFlow Blown Fibre
Denmark
“The New University Hospital” – commonly known as “DNU” which when completed in 2019 will treat approximately 1 million patients annually.
EA NETWORKS
FibreFlow Installation
Mid-Canterbury, New Zealand
Emtelle's FibreFlow solution chosen for EA Network's ambitious AUS$70 million plus development of a high-speed fibre optic network in New Zealand.
GOTTHARD BASE TUNNEL
Microduct installation
Emtelle provided thousands of kilometres of its FibreFlow™ Microduct solution to the transalpine Swiss Railway Gotthard Base Tunnel.
Blown Fibre Network
Spring Creek Towers
New York, USA
A cost-saving, blown fibre optic network (FON) for Spring Creek Towers – a modern residential community in New York City.
Fibia uses Emtelle MultiFu
MULTIFU ONE PROCESS FIBRE INSTALLATION
Århus, Denmark
Emtelle MultiFu ensures fibre installation in one process. The installer wanted to establish fibre but in a no dig area of the high street, it seemed impossible.
Engage Emtelle
css.php